It does not indicate that the port being displayed is invalid. This window simply indicates that no port has been selected yet. If you have installed a serial port pedal, you may see the following window when running the WavPlayer for the first time. The figure below shows COM1 and COM2 available for this example. The COM setting in the WavPlayer must match one of the port settings recognized by Windows and it must correspond to the port into which the foot pedal is connected. Find Ports in the device list and double-click on it to view the available ports. Then double-click the System icon and select the Device Manager tab from the System Properties window (Hardware tab on some versions of Windows). In earlier version of Windows, select Start → Settings → Control Panel from the Windows task bar. Select Device Manager from the list as shown in the image on the following page. To access the Device Manager in Windows XP/2000, right-click on My Computer and select the Manage menu option. If you are not certain about which COM ports your computer has available, check the Port settings in the Device Manager. If a computer has a 9-pin serial port, a serial port foot pedal can be connected. The pedal will appear in the device list as USB Human Interface Device as shown below. Select Device Manager from the list as shown in the image below. To access the Device Manager in Windows XP/2000, click right-click on My Computer and select the Manage menu option. To ensure that Windows properly detected the pedal, you may view the Device Manager to confirm that it was recognized. If USB is not checked, please see the Troubleshooting guide at the end of the WavPlayer section of this manual. The check mark should be next to the USB item on the ports list. To ensure that Windows properly detected the pedal, you can open the WavPlayer window (once the software has been installed), and click on the Ports menu. Once connected, your PC should automatically configure the port with the proper drivers. The foot pedal cable fits directly into the USB port. Once the software has been installed, you can begin using the software by clicking the WavPlayer icon that appears on your desktop or click Start → Programs → Bytescribe → WavPlayer.Ĭonnect the foot pedal to the USB port of your PC. Follow the prompts through the installation process. Place the installation CD into the appropriate drive. Next, make sure that your headset or speakers are properly installed and turned on.įinally, install the WavPlayer software by using the installation CD. If you are connecting a serial port pedal, see the section of this manual entitled Connecting a Serial Port Pedal. If you are connecting a USB pedal, see the following section entitled Connecting a USB Port Pedal. To install the WavPlayer, first connect the foot pedal to the appropriate port on your PC. The WavPlayer software also offers speed and adjustable backspace controls for many file types. The WavPlayer software can run in a minimized state so that the transcriptionist is able to type into a word processor on the same computer. WavPlayer runs in the Microsoft Windows operating system. The foot pedal controls the play, pause, rewind and fast forward functions and plugs directly into any serial or USB port of any PC computer. WavPlayer by Bytescribe is a software & foot pedal combination that allows the user to listen to a large variety of sound files while controlling them with a foot pedal, leaving the hands completely free to type dictated reports. 6 MAKING WAVPLAYER THE DEFAULT PLAYER FOR VARIOUS FILE TYPES.4.7 Using a Word Processor with WavPlayer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |